What do I need to open to let the coolant liquid out?
after that what do i do?
step by step pleaseHow to change coolant system?Drain the existing antifreeze by opening the top of radiator cap and the petcocks located near the bottom of the radiator on most cars.Before draining the system make sure water in engine block is cool. After draining engine close radiator cap, and the petcock. Add a can of quality radiator flush to the radiator following instructions on the can. Idle the engine as long as specified on the can of flush, or until the upper radiator hose gets hot. When some what cool drain the system again. Add 50/50 antifreeze and water to desired protection. Run engine to operating temperature, then stop engine and check for leaks. After engine cools down open radiator cap to make sure antifreeze is a the radiator level, then put cap back on. The most important thing is to always read instruction on the can of flush, it will take you step by step in doing the right job.How to change coolant system?you meant drain coolant easy openhood or slide undewr front end look up should see drain plug on bottom edge of radiator twist it stick drain pan under flow and wait
how to change coolant videoHow to change coolant system?drive it til it gets really hot than open the radiator cap refill with fresh 50/50 coolant note look close when you open the cap
